EXLONTU outlines a five-step guide for hazardous chemical storage lighting

EXLONTU has published a guide for facility planners and electrical contractors on selecting explosion-proof lighting for hazardous chemical storage warehouses. The framework focuses on safety certifications, optical performance, corrosion resistance, product fit and supplier reliability.

Why it matters: - Hazardous chemical storage sites need lighting that can reduce ignition risk, support safe operations and withstand corrosive environments. - Poor fixture selection can create surface ignition hazards, glare, trip risks and maintenance problems in high-risk warehouses. - Facility engineers and safety directors need a practical way to match lighting to ATEX and IECEx zone requirements, gas groups and temperature classes.

What happened: - EXLONTU published a guide from Zhongshan, Guangdong, China, on November 11, 2026, aimed at hazardous chemical storage facilities. - The guide lays out a five-step framework for choosing explosion-proof lamps and related industrial lighting. - The framework covers environmental classification, optical performance, material durability, fixture specifications and supplier reliability.

The details: - The guide says hazardous areas should be classified under standards such as ATEX and IECEx before lighting is selected. - Facilities must distinguish between Zone 1, where explosive atmospheres are likely in normal operation, and Zone 2, where they are unlikely and short-lived. - Fixtures should match the site’s gas group needs, including Group IIA, IIB or hydrogen-inclusive IIC, and the correct temperature class from T1 to T6. - Verified ATEX and CE certifications are presented as evidence that equipment has been tested for spark containment and thermal endurance. - Optical design matters because high-bay and medium-bay racks create narrow corridors and deep shelf areas that need uniform light levels. - Wide-beam flood lights or linear configurations can help deliver even lux levels across lower shelf tiers. - High CRI output is important for reading chemical labels, safety warnings and hazard symbols. - Anti-glare diffusers can reduce operator fatigue and visual blind spots caused by reflective drums and containers. - Over-lighting can create glare, while under-lighting can increase trip hazards and reading errors. - Photometric simulation should be used before purchasing fixtures. - Chemical storage areas can expose housings and seals to corrosive vapors, humidity, cleaning agents and chemical splashes. - The guide identifies high-pressure die-cast aluminum with anti-corrosion powder coating or marine-grade stainless steel as common housing benchmarks. - Silicone or fluorosilicone gaskets should stay elastic across temperature swings to block gas and moisture ingress. - Lenses should use impact-resistant tempered glass or high-grade polycarbonate. - EXLONTU says the company was founded in 2016 and is based in Zhongshan, China, with production and testing facilities focused on quality control and technology refinement. - Linear lamps are described as best for aisle lighting, flood lights for large staging areas and emergency backup lights for power outages. - The guide highlights a 150W explosion-proof ceiling work light with an Ex e IIC T6 protection rating for medium-to-high clearance storage zones. - The fixture is described as delivering high luminous flux, safe surface temperatures and IP66/IP67 ingress protection against moisture and chemical mist. - Efficient heat dissipation is presented as necessary to prevent driver degradation and support long service life in non-air-conditioned warehouses. - Industrial projects may require OEM and ODM customization for mounting, voltage or wiring needs. - Stable component inventories and predictable production schedules are presented as important for meeting project deadlines and compliance audits. - The guide directs readers to the official platform for product specifications and technical documentation.

Between the lines: - The guide reads like both a buyer’s checklist and a sales tool for EXLONTU’s explosion-proof lighting portfolio. - The emphasis on certifications, customization and lead times suggests the company is targeting regulated projects where compliance and procurement timing matter as much as fixture performance.

What's next: - Facility planners and contractors can use the guide to narrow lighting options before specifying fixtures for hazardous chemical storage sites. - Buyers needing ATEX- and CE-certified systems can review the company’s technical documentation and product options on the official platform. - Projects with unusual mounting or electrical requirements may move toward customized linear, flood or ceiling-mounted explosion-proof fixtures.